Your area
Sign Company in Burr Ridge, IL: Custom Business Signs, Permits, and Installation
In Burr Ridge, a sign with more than three colors needs the Board of Trustees’ approval, and every round of review pushes your opening date back. SignFreaks reads the village code before the first sketch, then handles the permit, the build, and the installation, so the sign you ordered is the sign that goes up.
Sales office: Burr Ridge — by appointment only
- Design, permit, build, install
- Burr Ridge code checked first
- Own shop, own crew, own lift
- One company, fully accountable
Context
Reading a Burr Ridge frontage
Burr Ridge sets sign limits by zoning district, and the office and manufacturing districts along the I-55 frontage roads carry the figures below.
- 3colorsColors a sign may carry before the Board of Trustees must approve it
- 75sq ftLargest tenant wall sign in an office building under 100,000 sq ft
- 0Banners, pennants, or balloon signs permitted on a business site
- Under 100,000 sq ft
Up to three tenant wall signs
Frontage divided by three sets the size, 50 to 75 sq ft.
A tenant of 10,000 sq ft or more may have one 75 sq ft sign.
- Over 100,000 sq ft
250 sq ft in office buildings
Manufacturing buildings are held to 150 sq ft instead.
Each tenant gets one wall sign, for up to three tenants.
- I-55 frontage roads
100 sq ft plus floor-area credit
Add 1 sq ft per 1,000 sq ft of floor area above 50,000.
North and South Frontage Road buildings can qualify.
- Ground signs
One per property, 75 sq ft
The 75 sq ft includes the monument base and cabinet.
Height is 8 feet, or up to 12 feet with extra setback.
Your options
Custom business signs in Burr Ridge, IL
Burr Ridge’s code treats a wall sign, a ground sign, and a window graphic differently, so the type you pick decides the size you get.
Channel Letters
Wall letters, sized to fit the 50 to 75 sq ft tenant allowance in smaller buildings.
Learn more
Monument Signs
The one ground sign a property gets, 8 feet tall and 75 sq ft with its base included.
Learn more
Acrylic Signs
Signs inside a lobby or suite, out of view from any road, fall outside the sign limits.
Learn more
CNC Router Signs
Routed logos get depth from material, not extra colors, which keeps a design to three.
Learn more
Window Wraps
A permanent window graphic does the work of a banner, which Burr Ridge does not allow.
Learn more
Commercial Canopies
Steel or aluminum over an entrance, engineered and branded for office and hotel arrivals.
Learn more
Approvals
What a sign company in Burr Ridge has to get approved
Burr Ridge regulates signs under Chapter 55 of its village code, and a design that fits the code takes a shorter road than one that does not.
A sign permit is required for every new sign in Burr Ridge and for changes to an existing one, down to a new sign face or new text.
Burr Ridge’s sign rules sit in Chapter 55 and its amendments, and they are not easy to pin down, so SignFreaks confirms the current rules with the village before anything is drawn. We prepare the application and handle the sign permits through installation, and when a design needs the longer route, we prepare that submission too.
Application and drawings
Dimensioned drawings show the sign’s size, colors, and position on the building face.
Village code review
The village checks the design against your district’s size, height, and color limits.
Plan Commission review
A design that goes past the limits is reviewed by the Plan Commission before any vote.
Board of Trustees vote
The Board of Trustees makes the final call on any sign the code does not allow outright.
By business type
Commercial signs by industry in Burr Ridge, IL
A sign company in Burr Ridge works for office, hospitality, dining, and retail sites, and each needs a different sign package and approval path.
Corporate Buildings
Headquarters and multi-tenant offices, where the landlord’s sign criteria meet the village’s.
Learn moreHotels
Hotel wall and ground signs can reach 300 sq ft combined, with Board of Trustees approval.
Learn moreRestaurants
Signs that look appetizing at night and survive the grease from a nearby kitchen exhaust.
Learn moreCommercial Businesses
Retail and service businesses that need to be found from the road and trusted up close.
Learn more
Proof
Google reviews for our Burr Ridge office
Excerpts from our Burr Ridge office’s Google reviews, quoted as the customers wrote them.
- Custom logo sign
“The project manager, Jasper, was very responsive, collaborative, and patient … Overall, it was a great experience and the final product looks fantastic!”
- Channel lettering
“Super quick, professional and reasonably priced experience! Individually lit channel lettering on a nice all black backdrop. They nailed it!”
Michael KlunkGoogle review - Repeat customer
“Great service, great product at a fair price. Nice people who follow up immediately. After working with them on a few projects, I wouldn’t recommend anyone else.”
Santiago LeonGoogle review
Getting to us
Plan your sign face to face in Burr Ridge
Bring your lease, your logo files, and the landlord’s sign rules, and we will check your custom business signs in Burr Ridge against the village code together.
The SignFreaks sales office is at 241 S Frontage Rd, Suite 42, Burr Ridge, IL 60527, on the same South Frontage Road that the village’s sign code names in its I-55 formula. Visits are by appointment, so the person running your job is in the room, not out on an install.
If your colors run past three, this is where we work out whether to redraw the logo or take the request to the Board of Trustees. Addresses and hours for all three offices are on the contact page.
Get a code-checked quote for custom business signs in Burr Ridge
A sign company in Burr Ridge should know what the village will approve before it quotes. Send the address, a frontage photo, and your opening date, and SignFreaks will come back with that answer and the cost to build.
Also covered
Next door to Burr Ridge, IL
Each village below writes its own sign code, so a sign company in Burr Ridge sends the same crew to any of them and runs a different code check.
Asked and answered
Common questions about signs in Burr Ridge
Call (312) 847-1994, Monday to Friday, 8:00 am to 5:00 pm.
Common questions about signs in Burr Ridge
Can a sign company handle sign design, permitting, fabrication, and installation in Burr Ridge?
A sign company in Burr Ridge can handle design, permitting, fabrication, and installation under one contract, and SignFreaks also covers repair and removal. We survey the frontage, check the design against the village code, file the permit, then build and install the sign.
What are the sign permit requirements for businesses in Burr Ridge?
Sign permit requirements for businesses in Burr Ridge start with the permit itself: the village requires one for every new sign and for any change to an existing sign, including a new sign face or new text. The design is measured against the limits for your zoning district, and a design that goes past them is reviewed by the Plan Commission and then the Board of Trustees. We prepare the sign permits and drawings, then manage the review through installation.
What types of commercial signs work best for businesses in Burr Ridge?
The best commercial signs for businesses in Burr Ridge are wall signs built from individual channel letters and a single monument sign at the road, because those are the two types the code sizes outright. Three questions narrow it fast: how far away the sign must be read, whether it has to work at night, and what the landlord allows. The answers usually leave one or two sensible options.
What type of sign is best for a corporate building in Burr Ridge?
The best sign for a corporate building in Burr Ridge is a tenant wall sign in channel letters plus one monument sign for the property. A building under 100,000 sq ft allows up to three tenant wall signs of 75 sq ft or less, and a larger office building steps up to 250 sq ft per tenant sign.
What storefront sign options are available for businesses in Burr Ridge?
Storefront sign options for businesses in Burr Ridge are individually built channel letters on the wall, a monument sign for a site set back from the road, and a permanent window wrap in place of a banner. A fixed landlord panel decides it for you: that is a lightbox.
Can I use a full-color logo on a sign in Burr Ridge?
A full-color logo can go on a sign in Burr Ridge only with approval, because the code prohibits signs with more than three colors unless the Plan Commission reviews them and the Board of Trustees approves. The faster route is a logo redrawn in three colors, and we confirm how the village counts your colors before we draw anything.
Are banners and temporary signs allowed in Burr Ridge?
Banners and temporary signs are not allowed in Burr Ridge: the village prohibits banners, pennants, streamers, balloon signs, and other portable or temporary signs. The one exception is a single sign advertising space for sale or lease, up to 12 sq ft and 5 feet tall. For an opening, a permanent window wrap built ahead of the date does the job a banner cannot.
How long does it take to install a business sign in Burr Ridge?
Installing a business sign in Burr Ridge typically takes a few weeks of fabrication and about a day on site once the design is approved. The permit review is the part that varies: a design inside the code follows the village’s normal review, while one that needs the Plan Commission and the Board of Trustees adds those meetings to the schedule, so we flag that before you order.
Why should I choose a local sign company in Burr Ridge?
You should choose a local sign company in Burr Ridge because each suburb writes its own sign code, and a company that works inside Burr Ridge’s catches problems before the permit does. SignFreaks keeps a sales office at 241 S Frontage Rd, so design reviews happen in person, and surveys and installs happen at your building.